Yanmar F & FX Series Hood Decal (Pair - Left & Right)

Yanmar F & FX Series Hood Decal (pair - left & right)

Premium quality automotive vinyl decal with very high quality cast lamination- will last many years. Made in the USA.

Includes:
 - 1 Left Side Hood Decal
 - 1 Right Side Hood Decal
 - Approximately 8" X 36"

Fits:
Most F & FX Series Yanmar Tractors Including: F15, F16, F17, F18, F20, F22, F24, F26, F32 as well as the FX versions of these (FX16, FX17, FX18, FX20, FX22, FX24, FX26, FX32). The decal "tail" is made extra long so that you can trim after installation for a perfect fit.

Pro Tip:
To apply, wipe down the area you will apply the decal with rubbing alcohol several times. You need to get all dirt and grease off the hood. Make sure the surface is smooth. Sand down any rough areas in the paint. Cut the decal sheet into individual left & right decals. Hold decal in position with painter's tape in several locations. Peel back appx 1/2 of the decal's backing material from one end and cut that peeled portion of backing off. Spray hood surface liberally with water with a couple drops of dish soap (buys you a little bit of time to reposition). Use a damp cloth, apply light pressure to the decal and slowly push the decal onto the hood starting with the center working to the end. Squeegee out any bubbles using a credit card or squeegee. Now remove painter's tape from the other half of the decal and remove the rest of the decal backing. Spray hood with soap/water solution and repeat the squeegee motion using damp cloth and then credit card.    

Installation Video:
There are also a lot of videos on Youtube that will help. Below is a pretty good one (not our video)
https://www.youtube.com/watch?v=19xWJ8PnALM

Shipping Times:
We order these from a local printing company in batches (to be sure you always have a fresh adhesive & fresh decal). Sometimes these sell very quickly (like when someone posts their project on a Yanmar forum) so sometimes there may be an extra day or two shipping delay.