Fitment Note: Your solenoid could be held on with a 4mm bolt or a 6mm bolt. This style uses the less common 6mm bolt. Click Here if you need the 4mm style. The best way to measure is to use a caliper and measure the thread diameter but if you don't have one you can also take a 4mm wrench and, if the open end of the wrench will slide over the threads then it is a 4mm bolt.
Fitment Note: This will only fit the factory starter and starters that are exact reproductions of the original starter. If you have an aftermarket starter then this will probably not fit. This will only fit the OEM S114-146, S12-23 starters
Shop Notes: Please see second image for important installation tip. The starter wire MUST be attached to the small wire strip side- not the battery side.
