Fitment Note: Your solenoid could be held on with a 4mm bolt or a 6mm bolt. This style uses the more common 4mm bolt. Click Here if you need the 6mm style. The best way to measure is to use a caliper and measure the thread diameter but if you don't have one you can also take a 4mm wrench and, if the open end of the wrench will slide over the threads then it is a 4mm bolt.
Fitment Note: This will only fit the factory starter and starters that are exact reproductions of the original starter. If you have an aftermarket starter then this will probably not fit. This will only fit the OEM S114-146, S12-23 starters
